Optical Fibre Cable
These cables are used for outside plant and consist of up to 12 singlemode (SM 9/125) fibre or multimode (MM 62.5/125 or MM 50/125)fibres.
This type of cable is the centre loose tube construction. The Loose Tube components are manufactured from high strength, low shrinkage PBT compound, and the tube will contain optical fibers. The loose tube also contains a thixotropic jelly, to prevent water penetration and protect the fibers against shock. A corrugated steel tape (0.15mm thick and with a 0.05mm copolymer coating on both sides) is then applied longitudinally over the loose tube. Between the steel tape and the loose tube, waterblocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. Finally the cable is completed with a black polyethylene (PE) sheath.
| TECHNICAL PARAMETERS |
| Parameter | Units | Value / Details | |
| Fibre Count | 4~12 | ||
| PBT Loose Tube Colour | Natural | ||
| Fibre Type | SM 9/125, MM 62.5/125 or MM 50/125 | ||
| Cable Dimension | mm | 11.8 | |
| Approx. Cable Weight | Kgs/km | 152 | |
| Bending Radius | Dynamic | ≥20 x Cable Diameter | |
| Static | ≥10 x Cable Diameter | ||
| Tensile Strength | Installation | N | 1500 |
| Operation | N | 600 | |
| Crush Resistance (Short Term) | N/10cm | 1000 | |
| Operational Temperature | °C | -30°C to +70°C | |
| Shipping Lengths | m | 2000 ± 100 |
| Part Number | Product Description |
|---|---|
| 8001 7040 | IMATEK 4 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7041 | IMATEK 6 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7042 | IMATEK 8 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7043 | IMATEK 12 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7044 | IMATEK 4 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7045 | IMATEK 6 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7046 | IMATEK 8 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7047 | IMATEK 12 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7048 | IMATEK 4 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7049 | IMATEK 6 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7050 | IMATEK 8 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7051 | IMATEK 12 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| SINGLEMODE OPTICAL FIBRE TECHNICAL DETAILS |
| Parameter | Units | Values / Details | |
| General Characteristics | Material: Index Profile: | Silica/Germanium doped silica Step Index, Matched Cladding | |
| Dimensions | Cladding Diameter Cladding Non-Circularity error Core / Cladding concentricity error | μm % μm | 125 ± 0.7 ≤ 1.0 ≤ 0.5 |
| Primary Coating | Material: External Diameter (uncoloured fibre) Coating Concentricity error | μm μm | UV Cured acrylic resin μm 245 ± 5 ≤ 12 |
| Transmission Characteristics | Mode Field Diameter @ 1310 nm | μm | 9.2 ± 0.4 |
| Maximum Attenuation (Un-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.35 ≤ 0.21 |
| Maximum Attenuation (Outdoor-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.36 ≤ 0.22 |
| Chromatic Dispersion | In the range 1285 to 1330 nm At 1550 nm Cut-off wavelength “λc” Cabled cut-off wavelength “λcc” Polarisation mode dispersion coefficient (PMD) | ps/(nm.km) ps/(nm.km) Nm nm ≤ ps/(nm².km) ps/(nm².km) ps/√km | ≤ 3.5 ≤ 18 1170 to 1280 ≤ 1260 1302 to1322 ≤ 0.092 ≤ 0.1 |
| Effective Group Index | @ 1310 nm @ 1550 nm | 1.4675 1.4681 | |
| Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 |
| MULTIMODE OPTICAL FIBRE TECHNICAL DETAILS |
| MULTI MODE OPTICAL FIBRE 62.5/125 | MULTI MODE OPTICAL FIBRE 50/125 | |||
| Parameter | Units | Value / Details | Value / Details | |
| General Characteristics | Material (Core / Cladding): Index Profile: | Doped Silica / Silica Graded Index | Doped Silica / Silica Graded Index | |
| Dimensions | Core Diameter Core Non-Circularity Cladding Diameter | μm % μm | 62.5 ± 2.5 ≤ 6 125 ± 2.0 | 50 ± 2.5 ≤ 6 125 ± 2.0 |
Cladding Non-Circularity Core / Cladding Concentricity Coating / Cladding concentricity | % μm | ≤ 1.0 ≤ 1.5 ≤ 12 | ≤ 1.0 ≤ 1.5 ≤ 12 | |
| Primary Coating | Material: | UV Cured acrylic resin | UV Cured acrylic resin | |
External Diameter (uncoloured fibre) (coloured fibre) | μm μm | 245 ± 10 250 ± 15 | 245 ± 10 250 ± 15 | |
Transmission Characteristics Maximum Attenuation (Un-cabled) | @ 850 nm @ 1300 nm | dB/km dB/km | ≤ 3.0 ≤ 0.7 | ≤ 2.5 ≤ 0.7 |
| Maximum Attenuation (Outdoor-cabled) | @ 850 nm @ 1300 nm Zero Dispersion Wavelength Zero Dispersion Slope Numerical Aperture | dB/km dB/km nm ps/(nm2.km) | ≤ 3.5 ≤ 1.5 1343 ± 11 ≤ 0.097 0.275 ±0.015 | ≤ 3.5 ≤ 1.5 1310 ± 10 ≤ 0.101 0.200 ±0.015 |
| Chromatic Dispersion | @ 850 nm @ 1300 nm | MHz.km MHz.km | ≥ 200 ≥ 600 | ≥ 500 ≥ 500 |
| Effective Group Index | @ 850 @ 1300 | 1.496 1.491 | 1.482 1.477 | |
Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 | 1 |
These cables are used for outside plant and consist of up to 12 singlemode (SM 9/125) fibre or multimode (MM 62.5/125 or MM 50/125) fibres.
This type of cable is the centre loose tube construction. The Loose Tube components are manufactured from high strength, low shrinkage PBT compound, and the tube will contain optical fibers. The loose tube also contains a thixotropic jelly, to prevent water penetration and protect the fibers against shock. A corrugated steel tape (0.15mm thick and with a 0.05mm copolymer coating on both sides) is then applied longitudinally over the loose tube. Between the steel tape and the loose tube, waterblocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. Finally the cable is completed with a black polyethylene (PE) sheath.
| TECHNICAL PARAMETERS |
| Parameter | Units | Value / Details | |
| Fibre Count | 4~12 | ||
| PBT Loose Tube Colour | Natural | ||
| Fibre Type | SM 9/125, MM 62.5/125 or MM 50/125 | ||
| Cable Dimension | mm | 11.8 | |
| Approx. Cable Weight | Kgs/km | 152 | |
| Bending Radius | Dynamic | ≥ 20 x Cable Diameter | |
| Static | ≥ 10 x Cable Diameter | ||
| Tensile Strength | Installation | N | 1500 |
| Operation | N | 600 | |
| Crush Resistance (Short Term) | N/10cm | 1000 | |
| Operational Temperature | °C | -30°C to +70°C | |
| Shipping Lengths | m | 2000 ± 100 |
| Part Number | Product Description |
|---|---|
| 8001 7040 | IMATEK 4 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7041 | IMATEK 6 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7042 | IMATEK 8 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7043 | IMATEK 12 Core 9/125μm SM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7044 | IMATEK 4 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7045 | IMATEK 6 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7046 | IMATEK 8 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7047 | IMATEK 12 Core 50/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7048 | IMATEK 4 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7049 | IMATEK 6 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7050 | IMATEK 8 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| 8001 7051 | IMATEK 12 Core 62.5/125μm MM Outdoor Light-Armored Unitube Optic Fibre Cable |
| SINGLEMODE OPTICAL FIBRE TECHNICAL DETAILS |
| SINGLEMODE OPTICAL FIBRE TECHNICAL DETAILS | |||
| Parameter | Units | Values / Details | |
| General Characteristics | Material: Index Profile: | Silica/Germanium doped silica Step Index, Matched Cladding | |
| Dimensions | Cladding Diameter,br> Cladding Non-Circularity error | μm % μm | 125 ± 0.7 ≤ 1.0 ≤ 0.5 |
| Primary Coating | Material: External Diameter (uncoloured fibre) Coating Concentricity error | μm μm | UV Cured acrylic resin μm 245 ± 5 ≤ 12 |
| Transmission Characteristics | Mode Field Diameter @ 1310 nm | μm | 9.2 ± 0.4 |
| Maximum Attenuation (Un-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.35 ≤ 0.21 |
| Maximum Attenuation (Outdoor-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.36 ≤ 0.22 |
| Chromatic Dispersion | In the range 1285 to 1330 nm Cut-off wavelength “λc” Cabled cut-off wavelength “λcc” Polarisation mode dispersion coefficient (PMD) | ps/(nm.km) Nm ps/(nm².km) ps/√km | ≤ 3.5 ≤ 18 1170 to 1280 ≤ 1260 1302 to1322 ≤ 0.092 ≤ 0.1 |
| Effective Group Index | @ 1310 nm @ 1550 nm | 1.4675 1.4681 | |
Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 |
| MULTIMODE OPTICAL FIBRE TECHNICAL DETAILS |
| MULTI MODE OPTICAL FIBRE 62.5/125 | MULTI MODE OPTICAL FIBRE 50/125 | |||
| Parameter | Units | Value / Details | Value / Details | |
| General Characteristics | Material (Core / Cladding): Index Profile: | Doped Silica / Silica Graded Index | Doped Silica / Silica Graded Index | |
| Dimensions | Core Diameter Core Non-Circularity | μm % μm | 62.5 ± 2.5 ≤ 6 125 ± 2.0 | 50 ± 2.5 ≤ 6 125 ± 2.0 |
Cladding Non-Circularity Coating / Cladding concentricity | % μm | ≤ 1.0 ≤ 1.5 ≤ 12 | ≤ 1.0 ≤ 1.5 ≤ 12 | |
| Primary Coating | Material: | UV Cured acrylic resin | UV Cured acrylic resin | |
External Diameter (uncoloured fibre) (coloured fibre) | μm μm | 245 ± 10 250 ± 15 | 245 ± 10 250 ± 15 | |
Transmission Characteristics Maximum Attenuation (Un-cabled) | @ 850 nm @ 1300 nm | dB/km dB/km | ≤ 3.0 ≤ 0.7 | ≤ 2.5 ≤ 0.7 |
| Maximum Attenuation (Outdoor-cabled) | @ 850 nm @ 1300 nm Zero Dispersion Wavelength | dB/km ps/(nm2.km) | ≤ 3.5 ≤ 1.5 1343 ± 11 ≤ 0.097 0.275 ±0.015 | ≤ 3.5 ≤ 1.5 1310 ± 10 ≤ 0.101 0.200 ±0.015 |
| Chromatic Dispersion | @ 850 nm @ 1300 nm | MHz.km MHz.km | ≥ 200 ≥ 600 | ≥ 500 ≥ 500 |
| Effective Group Index | @ 850 @ 1300 | 1.496 1.491 | 1.482 1.477 | |
Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 | 1 |
These cables are used for outside plant and consist of up to 12 singlemode
(SM 9/125) fibre or multimode (MM 62.5/125 or MM 50/125) fibres.
This type of cable is the centre loose tube construction. The Loose Tube components are manufactured from high strength, low shrinkage PBT compound, and the tube will contain optical fibers. The loose tube also contains a thixotropic jelly, to prevent water penetration and protect the fibers against shock. A corrugated steel tape (0.15mm thick and with a 0.05mm copolymer coating on both sides) is then applied longitudinally over the loose tube. Between the steel tape and the loose tube, waterblocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. Finally the cable is completed with a black polyethylene (PE) sheath.
| TECHNICAL PARAMETERS |
| Parameter | Units | Value / Details | |
| Fibre Count | 4~6 | 8~12 | |
| PBT Loose Tube Colour | Natural | ||
| Fibre Type | SM9/125, MM 62.5/125 or MM50/125 | ||
| Cable Dimension | mm | 9.4 | 9.7 |
| Approx. Cable Weight | Kgs/km | 95 | 99 |
| Bending Radius | Dynamic | ≥ 20 x Cable Diameter | |
| Static | ≥ 10 x Cable Diameter | ||
| Tensile Strength | Installation | N | 1500 |
| Operation | N | 600 | |
| Crush Resistance (Short Term) | N/10cm | 1000 | |
| Operational Temperature | °C | -30°C to +70°C | |
| Shipping Lengths | m | 2000 ± 100 |
| Part Number | Product Description |
|---|---|
| 8001 7028 | IMATEK 4 Core 9/125μm SM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7029 | IMATEK 6 Core 9/125μm SM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7030 | IMATEK 8 Core 9/125μm SM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7031 | IMATEK 12 Core 9/125μm SM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7032 | IMATEK 4 Core 50/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7033 | IMATEK 6 Core 50/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7034 | IMATEK 8 Core 50/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7035 | IMATEK 12 Core 50/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7036 | IMATEK 4 Core 62.5/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7037 | IMATEK 6 Core 62.5/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7038 | IMATEK 8 Core 62.5/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| 8001 7039 | IMATEK 12 Core 62.5/125μm MM Outdoor Non-Armored Optic Fibre Cable |
| Parameter | Units | Values / Details | |
| General Characteristics | Material: Index Profile: | Silica/Germanium doped silica Step Index, Matched Cladding | |
| Dimensions | Cladding Diameter Cladding Non-Circularity error | μm % μm | 125 ± 0.7 ≤ 1.0 ≤ 0.5 |
| Primary Coating | Material: External Diameter (uncoloured fibre) Coating Concentricity error | μm μm | UV Cured acrylic resin μm 245 ± 5 ≤ 12 |
| Transmission Characteristics | Mode Field Diameter @ 1310 nm | μm | 9.2 ± 0.4 |
| Maximum Attenuation (Un-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.35 ≤ 0.21 |
| Maximum Attenuation (Outdoor-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.36 ≤ 0.22 |
| Chromatic Dispersion | In the range 1285 to 1330 nm Cut-off wavelength “λc” Cabled cut-off wavelength “λcc” Polarisation mode dispersion coefficient (PMD) | ps/(nm.km) Nm ps/(nm².km) ps/√km | ≤ 3.5 ≤ 18 1170 to 1280 ≤ 1260 1302 to1322 ≤ 0.092 ≤ 0.1 |
| Effective Group Index | @ 1310 nm @ 1550 nm | 1.4675 1.4681 | |
Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 |
| MULTIMODE OPTICAL FIBRE TECHNICAL DETAILS |
| MULTI MODE OPTICAL FIBRE 62.5/125 | MULTI MODE OPTICAL FIBRE 50/125 | |||
| Parameter | Units | Value / Details | Value / Details | |
| General Characteristics | Material (Core / Cladding): Index Profile: | Doped Silica / Silica Graded Index | Doped Silica / Silica Graded Index | |
| Dimensions | Core Diameter Core Non-Circularity | μm % μm | 62.5 ± 2.5 ≤ 6 125 ± 2.0 | 50 ± 2.5 ≤ 6 125 ± 2.0 |
Cladding Non-Circularity Coating / Cladding concentricity | % μm | ≤ 1.0 ≤ 1.5 ≤ 12 | ≤ 1.0 ≤ 1.5 ≤ 12 | |
| Primary Coating | Material: | UV Cured acrylic resin | UV Cured acrylic resin | |
External Diameter (uncoloured fibre) (coloured fibre) | μm μm | 245 ± 10 250 ± 15 | 245 ± 10 250 ± 15 | |
Transmission Characteristics Maximum Attenuation (Un-cabled) | @ 850 nm @ 1300 nm | dB/km dB/km | ≤ 3.0 ≤ 0.7 | ≤ 2.5 ≤ 0.7 |
| Maximum Attenuation (Outdoor-cabled) | @ 850 nm @ 1300 nm Zero Dispersion Wavelength | dB/km ps/(nm2.km) | ≤ 3.5 ≤ 1.5 1343 ± 11 ≤ 0.097 0.275 ±0.015 | ≤ 3.5 ≤ 1.5 1310 ± 10 ≤ 0.101 0.200 ±0.015 |
| Chromatic Dispersion | @ 850 nm @ 1300 nm | MHz.km MHz.km | ≥ 200 ≤ 600 | ≥ 500 ≤ 500 |
| Effective Group Index | @ 850 @ 1300 | 1.496 1.491 | 1.482 1.477 | |
Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 | 1 |
These cables are used for indoor applications and consist of 4, 6, 8,
12 single-mode (SM 9/125) fibre or multimode (MM62.5/125 or MM50/125) fibres. Each fibre is coated to a 900 micron diameter, with a durable, protective material and the coating (buffer material). Each fibre is uniquely colour coded as defined in Table 1. Surrounding the group of buffered fibres are aramid yarns to provide the sufficient tensile strength to the cable, which effectively avoids damaging the cable during the installation, transports, operation etc. An outer sheath is then applied over the tight fibre / aramid assembly. The outer sheath has a flame retardant function, PVC (Riser OFNR).
| PHYSICAL SPECIFIED (TABLE 1) |
| TECHNICAL PARAMETERS |
| Parameter | Units | Value / Details | ||||
| 4C Tight Buffered Cable | 6C Tight Buffered Cable | 8C Tight Buffered Cable | 12C Tight Buffered Cable | |||
| Fibre Count | 4 | 6 | 8 | 12 | ||
| Cable Type | PVC (Riser OFNR) | |||||
| Buffer Colours | See Table-1 relevant buffered fiber colours | |||||
| Cabled Fibre Attenuation | See Fibre Characteristics Table</td | |||||
| Fibre Type | SM 9/125 MM 50/125 MM 62.5/125 | |||||
| Outer Sheath Colours | SM-Yellow, MM-Orange | |||||
| Buffer Diameter | 0.9 ± 0.05 | |||||
| Outer Diameter | mm | 6.2 ± 0.2 | ||||
| Outer Sheath Radial Thickness | mm | 0.7 | 0.7 | 0.75 | 0.75 | |
| Approx. Cable Weight | Kgs/km | 19 | 21 | 26 | 32 | |
| Bending Radius | ≥ 20 x Cable Diameter ≥ 10 x Cable Diameter | |||||
| Tensile Strength (Installation) | N | 660 | ||||
| Crush Resistance | N/10cm | 500 | ||||
| Operational Temperatur | °C | -20°C to +70°C | ||||
| m | Up to 2000 |
| Part Number | Product Description | Part Number | Product Description | |
| 8001 7004 | IMATEK 4 Core 9/125µm SM Indoor Building Optic Fibre Cable | 8001 7016 | IMATEK 4 Core 9/125µm SM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7005 | IMATEK 6 Core 9/125µm SM Indoor Building Optic Fibre Cable | 8001 7017 | IMATEK 6 Core 9/125µm SM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7006 | IMATEK 8 Core 9/125µm SM Indoor Building Optic Fibre Cable | 8001 7018 | IMATEK 8 Core 9/125µm SM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7007 | IMATEK 12 Core 9/125µm SM Indoor Building Optic Fibre Cable | 8001 7019 | IMATEK 12 Core 9/125µm SM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7008 | IMATEK 4 Core 50/125µm MM Indoor Building Optic Fibre Cable | 8001 7020 | IMATEK 4 Core 50/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7009 | IMATEK 6 Core 50/125µm MM Indoor Building Optic Fibre Cable | 8001 7021 | IMATEK 6 Core 50/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7010 | IMATEK 8 Core 50/125µm MM Indoor Building Optic Fibre Cable | 8001 7022 | IMATEK 8 Core 50/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7011 | IMATEK 12 Core 50/125µm MM Indoor Building Optic Fibre Cable | 8001 7023 | IMATEK 12 Core 50/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7012 | IMATEK 4 Core 62.5/125µm MM Indoor Building Optic Fibre Cable | 8001 7024 | IMATEK 4 Core 62.5/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7013 | IMATEK 6 Core 62.5/125µm MM Indoor Building Optic Fibre Cable | 8001 7025 | IMATEK 6 Core 62.5/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7014 | IMATEK 8 Core 62.5/125µm MM Indoor Building Optic Fibre Cable | 8001 7026 | IMATEK 8 Core 62.5/125µm MM LSZH Indoor Building Optic Fibre Cable | |
| 8001 7015 | IMATEK 12 Core 62.5/125µm MM Indoor Building Optic Fibre Cable | 8001 7027 | IMATEK 12 Core 62.5/125µm MM LSZH Indoor Building Optic Fibre Cable |
| SINGLEMODE OPTICAL FIBRE TECHNICAL DETAILS |
| Parameter | Units | Values / Details | |
| General Characteristics | Material: Index Profile: | Silica/Germanium doped silica Step Index, Matched Cladding | |
| Dimensions | Cladding Diameter Cladding Non-Circularity error Core / | μm % μm | 125 ± 0.7 ≤ 1.0 ≤ 0.5 |
| Primary Coating | Material: External Diameter (uncoloured fibre) Coating Concentricity error | μm μm | UV Cured acrylic resin μm 245 ± 5 ≤ 12 |
| Transmission Characteristics | Mode Field Diameter @ 1310 nm | μm | 9.2 ± 0.4 |
| Maximum Attenuation (Un-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.35 ≤ 0.21 |
| Maximum Attenuation (Indoor-cabled) | @ 1310 nm @ 1550 nm | dB/km dB/km | ≤ 0.70 ≤ 0.70 |
| Chromatic Dispersion | In the range 1285 to 1330 nm At 1550 nm Cut-off wavelength “λc” Cabled cut-off wavelength “λcc” Polarisation mode dispersion coefficient (PMD) | ps/(nm.km) ps/(nm.km) Nm ps/(nm2.km) ps/√√km | ≤ 3.5 ≤ 18 1170 to 1280 ≤ 1260 1302 to1322 ≤ 0.092 ≤ 0.1 |
| Effective Group Index | @ 1310 nm @ 1550 nm | 1.4675 1.4681 | |
| Mechanical Characteristics of Primary Fibre | Proof Test for 1 sec (or equivalent) | % | 1 |
| MULTIMODE OPTICAL FIBRE TECHNICAL DETAILS |
| MULTI MODE OPTICAL FIBRE (OM1) 62.5/125 | MULTI MODE OPTICAL FIBRE 50/125 (OM2) | |||
| Parameter | Units | Doped Silica / Silica | Doped Silica / Silica | |
| General Characteristics | Material (Core / Cladding): Index Profile: | Graded Index 62.5 ± 2.5 | Graded Index 50 ± 2.5 | |
| Dimensions | Core Diameter Core Non-Circularity | μm % μm | ≤ 6 125 ± 2.0 ≤ 1.0 | ≤ 6 125 ± 2.0 ≤ 1.0 |
| Primary Coating | Cladding Non-Circularity Core / Cladding Concentricity Coating / Cladding concentricity | μm μm | ≤ 1.5 ≤ 12 UV Cured acrylic resin | ≤ 1.5 ≤ 12 UV Cured acrylic resin |
| Transmission Characteristics | Material: | μm | 245 ± 10 | 245 ± 10 |
| Maximum Attenuation (Un-cabled) | External Diameter (uncoloured fibre) (coloured fibre) | dB/km dB/km | 250 ± 15 | 250 ± 15 |
| Maximum Attenuation (Indoor-cabled) | @ 850 nm | dB/km dB/km | ≤ 3.0 ≤ 0.7 | ≤ 2.5 ≤ 0.7 |
| Chromatic Dispersion | @ 1300 nm @ 850 nm @ 1300 nm Zero Dispersion Wavelength @ 850 nm | ps/(nm.km) ps/(nm.km) Nm ps/(nm2.km) ps/√√km | ≤ 3.5 ≤ 1.5 1343 ± 11 ≤ 0.097 0.275 ±0.015 ≤ 200 ≤ 600 | ≤ 3.5 ≤ 1.5 1310 ± 10 ≤ 0.101 0.200 ±0.015 ≤ 500 ≤ 500 |
| Effective Group Index | @ 1300 nm @ 850 | 1.496 1.491 | 1.482 1.477 | |
Mechanical Characteristics of Primary Fibre | @ 1300 Proof Test for 1 sec (or equivalent) | % | 1 | 1 |